Custom Seamless / ERW Hollow Tubing Brass Tubes Stockist, Hollow Brass Rectangular Pipe, SPECIAL Hollow rods capillary brass tube pipe, Thin-walled brass pipe tubes, Large Diameter Brass Pipe, Brass tubes, BRASS HOLLOW TUBE – SPECIAL BRASS TUBE – CUSTOMIZED BRASS TUBE CHINA SUPPLIER FACTORY 1. Square hollow brass pipe is used for both architectural and […]
Custom Size Precision Square Brass, Solid Brass Flat Rods, High Hardness Brass Flat Bars, Brass Raw Material, Mill polished bright brush brass copper rod China Supplier
Item: Precision Square Brass
Same as per customer’s requirements,superior quality: stable chemical composition, very good mechanical properties,precise dimensions,clean and bright surface.
Brass is easily melted and carved or shaped into any shape.
For this reason, this material is used in various fields. Brass tube is the good creation of brass. The tubes are commonly used in the bathroom. Brass tube offers high resistance to moisture and it do not get rusted. Besides, brass tubes are widely made into decorative accessories, because of their golden bright glaze which are polished.
Brass tubes are in the manufacture of counters, precision instruments, TV antennas, electronic devices, and so on. Slowly but steadily, brass tubes are replaced other metallic pipes in all areas of work.
Specifications of admiralty brass block bar tube
Manufacturing Dimension of Brass Tube:
We can manufacture brass tube according to your requirements:
1) Outside diameter of brass tube: 4mm – 203mm
2) Thickness of brass tube: 0.5mm – 3.5mm
3) Straight of brass tube: to 25m
conforming to SB111 C44300 of ASME
Tube Size Dia. 15.875 x 1.65 x 1.24 (Length of each tube required is 1.5 Mtrs.)
The tubes be confined to below specifications
a) Each tube shall be Eddy current tested (E243) before finning
b) Temper Annealing & hardness measurement shall be done as per SB 359
c) Mechanical Test must be carried out(VTS, YS Hardness)
d) Flattening test must be carried out as per ISO: 8492
e) Expansion test to be done as per ASTM B 153
f) Mercurous Nitrate test shall be done as per SB 359 (B 154)
g) Finning Shall be done as per Wolverline cat no.60-194049
i) Unfinned portions at both ends shall be 70mm
j) Each tube shall be hydro tested at 70 atg before & at 40 atg after finning.
Brass round rod is used to transfer liquids, air, or solids, and it is characterized by a round shape and a hollow center. The tubing is seamless for a smoother interior flow and greater burst strength than welded tubing. It is corrosion-resistant and provides greater hardness, can be used for pipeline, model making, model rail and boat, architectural design, engineering, school projects. Customized Precision Flat Brass Bars