Hollow capillary brass tube pipe, Thin-walled brass pipe tubes, Large Diameter Brass Pipe, Brass tubes Type: Capillary Tube Application: Air Condition Or Refrigerator Specification: 2mm-914mm Grade: C12000 Length: 1-12m, 1-12mm Cu (Min): 99.90% Alloy Or Not: Is Alloy Ultimate Strength (≥ MPa): 205 Elongation (≥ %): 40 Wall Thickness: 0.4-36mm Outside Diameter: 1-625mm Processing Service: […]
Forging Brass Square Extrusion Bars, International Standards Brass Bars, Brass Sections and Profiles, ADMIRALITY BRASS SQUARES, ASTM Standard Specification for Brass Rod Bar Shapes, brass rod (round, hexagonal, and octagonal), bar (rectangular and square)
We manufacture and export High Quality of Forging Brass Square Extrusion Bars. We aim at satisfying all types of customer demands by supplying them Brass Square Extrusion Rod in the size and shape desired by them. Extensive stock of Brass Square Extrusion Rod and fittings are also available for immediate delivery and package supply as per the need of customer.
C 675, cz 114, cz 115, en 12165 CW 721 r & CW 722r.
5.0, 10.0, 20.0, 30.0, 40.0, 70.0, 100.0
If you need special size and configuration or if you would like to place an order for Brass Square Extrusion Rod and Profiles or Ferrous and Non Ferrous Extrusion Rods products with plating please Contact Us
Flat Bars are produced in the following dimensions:
Drawn Rods and Bars – 6.35mm Thickness Min. 76.20mm Width Max.
Extruded Rods and Bars – 31.75mm Thickness min.
Available Straightened – 6.35mm Thickness min.
Standard Length – 2.5m, 3.0m, 3.6m
Forging Brass Rods
IS – 6912/2005 FLB
Modified Forging Brass Rods as per IS – 8737
CW 617 N EN 12164 : 1998
Brass Square Extrusion Bar manufactured and exported. We aim at satisfying all types of customer demands by supplying them brass square bar in the size and shape desired by them. Extensive stock of Brass Square Bar and fittings are also available for immediate delivery and package supply as per the need of customer.
Round Shaped Rods are produced in the following dimensions:
Drawn Rods and Bars – 5.00mm to 63.50mm
Extruded Rods and Bars – 15.00mm to 127.00mm
Available Straightened – 15.00mm to 80.00mm
Standard Length – 2.5m to 5.0m
Width Across Flats
Up to Incl.
Plus & Minus
Plus Nil – Minus
This specification establishes requirements for brass rod (round, hexagonal, and octagonal), bar (rectangular and square), and shapes of UNS Alloys C21000, C22000, C23000, C24000, C26000, C26800, C27000, and C27400. The material shall be made from cast billets, logs, or rods of copper alloy, as determined by chemical analysis. The products shall be manufactured by such hot working, cold working, and annealing processing as to produce a uniform wrought structure. The material shall conform to the chemical compositional requirements prescribed for copper, lead, iron, and zinc. The standard tempers, either hard or soft anneal (namely: O60, H01, H02, and H04), for rod and bar are specified. Tensile requirements to which the product shall conform includes tensile strength, yield strength, and elongation. The dimensional requirements for rods, bars, and shapes are given. High Tensile Brass Hollow Pipes Brass Lead Free Hollow Rods