CZ115 / CW722R Extruded High Tensile Brass (Restricted Al), CZ115 (CW722R) Brass Alloy, Extrudtion brass, excellent strength Brass extrusions, CuZn40Mn1Pb1FeSn brass roll coil sheet, Yellow Brass China Factory CZ115 / CW722R Extruded High Tensile Brass (Restricted Al) consists of of a duplex structure and is a high tensile brass with a restricted aluminium content, enabling […]
Extrusion Brass Octagon Rods, Hexagon and Octagon Extrusion Rods, Brass Sections and Profiles, ASTM Standard Specification for Brass Hexagon and Octagon Rod Bar Shapes, brass rod (round, hexagonal, and octagonal), bar (rectangular and square) China brass factory
We manufacture and export Quality of Extrusion Brass Octagon Rods. We aim at satisfying all types of customer demands by supplying them Hexagon and Octagon Extrusion Rods in the size and shape desired by them. Extensive stock of Brass Square Extrusion Rod and fittings are also available for immediate delivery and package supply as per the need of customer.
c464, c485, cz112, en 12164 CW 712r & cuzn38sn1.
4.0, 10.0, 20.0, 30.0, 40.0, 50.0, 70.0, 100.0
If you need special size and configuration or if you would like to place an order for Hexagon and Octagon Extrusion Rods or Ferrous and Non Ferrous Extrusion Rods products with plating please Contact Us.
Hexagon Shaped Rods are produced in the following dimensions:
Drawn Rods and Bars – 6.00mm to 44.45mm
Extruded Rods and Bars – 45.00mm to 76.20mm
Available Straightened – 6.00mm to 44.45mm
Standard Length – 2.5m, 3.0m, 3.6m
ASTM Standards, Extruded Brass Rods and Bars
B16/B16M Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
B36/B36M Specification for Brass Plate, Sheet, Strip, And Rolled Bar
B121/B121M Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
B124/B124M Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
B134/B134M Specification for Brass Wire
B135 Specification for Seamless Brass Tube
B249/B249M Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
B587 Specification for Welded Brass Tube
E8/E8M Test Methods for Tension Testing of Metallic Materials
E62 Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
E478 Test Methods for Chemical Analysis of Copper Alloys
DOWEDO from the good machinability, corrosion resistance and higher strength properties, brass rods have other added benefits over Stainless steel and Aluminum.
Some close tolerance components like cable glands can be as much as 33% cheaper than Aluminum or Stainless Steel. The swarf resulting from the machining of Brass rods will give fine small chips which are easier to clean and it reduces machine tool wear and use of lubrication whereas aluminum gives a constant build up of swarf when machining resulting in faster tool wear. Stainless steel components can be two to five times more expensive than identical items made in brass. Brass Round Extrusion Bar
Brass Solid rods are an excellent replacement for plastic tap tops which are constantly susceptible to stress cracking and failure. The ease with which brass can be hot stamped, polished and plated means that modern designs of brass tap tops are available with lifetime expectancy equal to that of the tap.
DOWEDO produces Brass Extruded Rods in solid forms and in various shapes like Round, Hex and Squares which are available to suit a wide variety of engineering applications.
These bars are available in straight lengths ranging from 4 mm to 75mm Diameter. Brass Hexagon Extrusion Bar
|Width Across Flats||Tolerance – Minus Only|
|Up to incl.|
|Normal Plus & minus|
|Plus Nil – Minus|
|70.0||100.0||2.00%||+ 1.5%||– 1.5%|
|100.0||3.00%||+ 2.0%||– 2.0%|