Brass Fittings

//Brass Fittings
  • Brass Fittings

Brass Fittings, Solder Joint Brass Fitting, Welding Brass Fittings,  China Supplier

Product Name: Brass Fittings

TYPEBrass Fittings
APPLICATIONSolder Joint , Welding
TEMPERHard(Y) / Half Hard (Y2) / Soft (M)    / Light Soft(M2)
DIMENSIONSPer Your Requirement
PACKINGCarton Boxes / Sealed Wooden Pallets
MOQ300 Kgs

Specializing in brass fittings, pipe fittings, hose barbs, hydraulic fittings, valves and accessories for tube, pipe and hose applications including JIC, SAE, BSPP and NPT thread.

• For use with copper, brass, aluminum and welded steel tubing that can be flared.
• Used extensively for connections of fuel, oil, air, liquid petroleum (LP), and natural gas lines.

Product Advantages
• DOWEDO Brass flare fittings resist mechanical pull out.
• Recommended for higher pressures than those covered by compression fittings.
• Designed to be assembled and disassembled over and over again.
• Reusable with long or short nuts.
• Manufactured from brass.
• High quality and service.

Special Orders
• Special fitting configurations and sizes may be ordered. Please furnish a print or sketch of your needs with your inquiry.
• Fittings are available in bulk quantities on request. Contact your sales representative for details.

Assembly Instructions
1. Cut tubing to required length, making sure that the ends are square and all burrs are removed.
2. Slide nut onto tubing. Threaded end of nut must face out.
3. Flare tubing end with a 45˚ flaring tool.
A. Measure flare diameter.
B. Check flare for excessive thin out.
4. Lubricate threads with a drop of oil and assemble nut onto body, hand tighten.
5. Tighten with wrench until assembly feels “solid”. Then apply a one-sixth turn.

  • Affordable price
  • Customized design is Available
  • T/T, L/C or other payment accepted
  • Fast shipping, Worldwide delivery
  • Quality guaranteed
  • Bulk discounts for larger orders

Product Range

error: Content is protected !!