Brass Strips Coils Rolls

Measures to Solve Discoloration in Brass Strip Production

Measures to solve discoloration in brass strip production 1. Control the acid concentration during pickling. When the oxide layer on the surface of annealed brass strip is washed away, the high acid concentration is meaningless. On the contrary, if the concentration is too high, the residual acid attached to the surface of the brass belt [...]

By Brass Copper|April 29th, 2021|Brass Accessories, Brass Applications, Brass Components, Brass Fitting, Brass Parts, Brass Shapes, Brass Sheet|Comments Off

Characteristics of Brass Strip Production Method

Characteristics of brass strip production method: 1. Cold rolling of brass strip (1) Plastic deformation. (2) The pressure in the roll gap area is high, and there is a pressure distribution, * *, up to 2700mpa. (3) At the same time, there is friction along the rolling direction and the opposite rolling direction. (4) The [...]

By Brass Copper|April 7th, 2021|Brass Accessories, Brass Billets, Brass Components, Brass Fitting, Brass Parts, Brass Sections and Profiles, Brass Shapes, Brass Sheet, Brass Types|Comments Off

error: Content is protected !!