Duplex 2205 Stainless Steel – Duplex 2205 is a two-phase, ferritic, austenitic 22% chromium, 3% molybdenum, 5 to 6% nickel alloyed stainless steel. It is the most widely used duplex stainless steel grade and is characterized by high yield strength, double that of the standard austenitic stainless steel grades. It also demonstrates good fatigue strength, as well as outstanding resistance to stress corrosion cracking, crevice, pitting, erosion, and general corrosion in severe environments.

Duplex 2205 Stainless Steel

Duplex 2205 Stainless Steel

Applications:

  • Chemical processing, transport and storage – pressure vessels, tanks, piping, and heat exchangers
  • Oil and gas exploration and processing equipment – piping, tubing, and heat exchangers
  • Marine and other high chloride environments
  • Effluent scrubbing systems
  • Pulp and paper industry – digesters, bleaching equipment, and stock-handling systems
  • Cargo tanks for ships and trucks
  • Food processing equipment
  • Biofuels plants

Standards:

  • ASTM/ASME: A240 UNS S32205/S31803
  • EURONORM: 1.4462 X2CrNiMoN 22.5.3
  • AFNOR: Z3 CrNi 22.05 AZ
  • DIN: W.Nr 1.4462
  • Corrosion Resistance:
    • Due to its high chromium, molybdenum, and nitrogen content, Duplex 2205 demonstrates superior corrosion resistant properties to 316 and 316L in most environments
    • Chromium, molybdenum, and nitrogen content also provide high resistance to pitting and crevice corrosion, even in oxidizing and acidic solutions
    • Resistant to chloride stress corrosion cracking and temperatures of up to about 302°F (150°C)
    • The presence of ferrite provides for good performance of Duplex 2205 in caustic environments

    Heat Resistance:

    • Similar to other duplex stainless steels, Duplex 2205 has good oxidation resistance at high temperatures
    • Subject to embrittlement when exposed to temperatures above 572°F (300°C) even when exposed for short periods of time; Duplex 2205 is therefore not recommended for use above 572°F (300°C)
  • Cold Drawn Bars
    ShapeSize Range (mm)Size Range (mm)
    Round2 to 213/32 to 13/16
    Hexagon4 to 755/32 to 3
    Square4 to 455/32 to 3
    Smooth, Turned & Polished
    ShapeSize Range (mm)Size Range (mm)
    Round22 to 10013 / 16 to 4
    Centerless Ground
    ShapeSize Range (mm)Size Range (mm)
    Round22 to 10013 / 16 to 4
    Centerless Ground & Polished
    ShapeSize Range (mm)Size Range (mm)
    Round22 to 10013 / 16 to 4
    Pump Shaft quality
    ShapeSize Range (mm)Size Range (mm)
    Round22 to 15013 / 16 to 6
    Forged Rough Turned
    ShapeSize Range (mm)Size Range (mm)
    Round155 to 4006 1/4 to 16
Brass Flat Rectangular Rod

Brass Flat Rectangular Rod

Brass Flat Rectangular Rod, Brass Bar Plate, Brass Rectangular Sheet Rod, Rectangle Brass Bar, Brass Plate, Brass Flat Rectangular Bar, Rectangular Brass Plates Bars, Copper Brass Plate China Factory Brass Flat Rectangular Rod Feature: Standard ASTM B301 B150 B151 B187 JIS 3250 DIN EN12168 Size 3-800mm Length:1-6m Grade Copper:C11000 C10200 C1100 C1220 T2 CU-OF CU-SF […]Duplex 2205 Stainless Steel

Brass Flat Rod

Brass Flat Rod

Brass Flat Rod Brass Bar Plate, Brass Rectangular Sheet Rod, Rectangle Brass Bar, Brass Plate, Brass Flat Rectangular Bar, Rectangular Brass Plates Bars, Copper Brass Plate China Factory Brass Flat Rod Feature: Standard ASTM B301 B150 B151 B187 JIS 3250 DIN EN12168 Size 3-800mm Length:1-6m Grade Copper:C11000 C10200 C1100 C1220 T2 CU-OF CU-SF Brass:C28000 C27400 […]Duplex 2205 Stainless Steel

Brass Bar Plate

Brass Bar Plate

Brass Bar Plate, Brass Rectangular Sheet Rod, Rectangle Brass Bar, Brass Plate Sheeting, Brass Flat Rectangular Bar, Rectangular Brass Plates, brass sheet plate tube, Brass Rectangle Bars, Copper Brass Plate China Factory Brass Bar Plate Feature: Standard ASTM B301 B150 B151 B187 JIS 3250 DIN EN12168 Size 3-800mm Length:1-6m Grade Copper:C11000 C10200 C1100 C1220 T2 […]Duplex 2205 Stainless Steel