Copper Pipe Heat Exchanger

C70600 , Copper nickel offers excellent corrosion resistance, especially in marine salt water environments. The main, wrought coppernickel alloys chosen for sea water service contain 10 or 30 percent nickel. They also have important additions of iron and manganese which are necessary to maintain good corrosion resistance

Typical Applications:
AUTOMOTIVE: Power Steering Tube, Brake Lines
CONSUMER: Screw Lamp Bases
INDUSTRIAL: Condenser Plates, Condensers, Weld Torch Tips, Heat Exchanger Tubes, Valve Bodies, Evaporator Tubes, Pressure Vessels, Distiller Tubes, Pump Impellers for Oil Refining, Ferrules, Evaporators
MARINE: Boat Hulls, Tube Sheet for Salt Water Service, Salt Water Pipe Fittings, Salt Water Piping Systems, Salt Water Piling Wrap, Hot Water Tanks, Salt Water Baffles, Propeller Sleeves, Ship Hulls, Water Hoses

Equivalent Specifications

BSCN 102
JISC 7060

Chemical Composition

Min/MaxRem1.0 – 1.80.0519.0 – 11.01

Physical Properties

Coefficient of Thermal Expansion9.5 10−6Per °F (68-572 F)
Density0.323 lb/in3 at 68 F
Electrical Conductivity9 %IACS @ 68 F
Electrical Resistivity115.0 ohms-cmil/ft @ 68 F
Melting Point Liquid US2100 F
Melting Point Solid US2010 F
Modulas of Elasticity in Tension18000 ksi
Modulas of Rigidity6800 ksi
Specific Gravity8.94
Specific Heat Capacity0.09 Btu/lb/°F at 68 F
Thermal Conductivity26.0 BTU in/hr.ft2.°F @ 68 F

Sizes Available

HOLLOW RODSMin Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS8mm To 100 mm
HEX10mm To 60mm
SQUARE10mm To 60mm
FLAT10mm Min Thickness and max Width 120mm
BILLETSUp to 200 mm
INGOTSAS per Specification
Copper Pipe Heat Exchanger

Copper Pipe Heat Exchanger

Heat Exchanger Brass Tube

C272 Brass Tubing for Heat Exchanger Shells

Heat Exchanger Copper Tube Coil 0.2 to 2mm

ETP Copper Tube for Heat Exchanger Pipe

Heat Exchanger Brass Pipe