Copper Tape

//Copper Tape

Copper Bar Processing

Copper bar processing: The necessary tools for copper bar manufacturing shall be prepared for copper bar processing to reduce the manufacturing error of copper bar. The calculation of copper bar blanking makes full use of Pythagorean theorem. In the calculation of copper bar, pay attention to adding or subtracting the thickness of copper bar to [...]

By |October 14th, 2021|Copper, Copper Parts, Copper Plate, Copper Sheet, Copper Strips, Copper Tape, Copper Tubes|Comments Off on Copper Bar Processing

Copper Strip Degreasing Methods

Copper strip degreasing methods include solvent degreasing, alkali degreasing, ultrasonic degreasing, high-pressure hot water degreasing, electrolytic degreasing, etc. 1. Solvent degreasing The degreasing solvent is used to dissolve the oil on the strip surface and collect it into a container. The volatile solvent is volatilized, collected and reused, and the pollutants are separated from the [...]

By |October 8th, 2021|Copper, Copper Parts, Copper Strips, Copper Tape, Copper Wires|Comments Off on Copper Strip Degreasing Methods
  • Copper Plate Supplier

Copper Plate Supplier

Copper Plate Supplier Exporter Of Copper Plate, Perforated Copper Plate Supplier We Are An Established Manufacturer & Supplier Of Copper Plate. We Cater To National And International Markets. 3/16″ Copper Plates & Copper Plate 10mm Are Used A Lot In Applications That Deal With Sanitation, Central Heating, Drinking Water, Etc. There Are A Quite A [...]

By |January 17th, 2021|BRASS & COPPER, Copper, Copper Plate, Copper Plumbing, Copper Strips, Copper Tape, DoWeDo News, Metal, Metal Knowledge, PLATE|Comments Off on Copper Plate Supplier
  • Heat Exchange Use Copper Pipes

Heat Exchange Use Copper Pipes

Heat Exchange Use Copper Pipes Description Copper tube/pipeStandard ASTM B280,JIS H3300,AS/NZS1571.JIS3300-2006Material UNS:C10100,C10200,C11000,C12000.GB:TU0,TU1,TU2,TU3,TP1,TP2JIS:C1011,C1020,C1100,C1221,C1201,C1220Surface mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as requiredHardness 1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etcShape Round,Square,Rectangular,Oval,half-roundSize OD:2mm~610mm WT:0.3mm~80mm Length: 1m, 2m, 3m, 6m, or as required.Application Copper are of good heat conductibility. They are widely used for heat exchangers,radiators, coolers, electro-heat-up pipe, air conditioner andrefrigerators, oiltransportation, brake [...]

By |September 3rd, 2020|Copper, Copper Nickel Tube, Copper Pipe, Copper Tape, Copper Tubes, Copper Tubing, DoWeDo News, Grade, Metal, Metal Knowledge, PIPE, Seamless Tubes, Tubing, TUBING, Tubing Material|Comments Off on Heat Exchange Use Copper Pipes
  • Bare Copper Tape

Bare Copper Tape

Bare Copper Tape - Our range of Bare copper tapes are widely applicable for switch terminals, electrical conductors, etc. Available in different sizes as per the client's requirement. High conductivity cu tapes to bs - 1432 - c101 / c103 Bare Copper Tape Conductor (A x B) mm Product Code 20 x 1.5 [...]

By |January 19th, 2018|BRASS & COPPER, Copper, Copper Coils, Copper Tape, Copper Wires, Metal, Wire|Comments Off on Bare Copper Tape