Copper Nickel

//Copper Nickel
  • Copper-Nickel Tubing

Automotive Hydraulic Brake Tube 90-10 Copper-Nickel Tubing

Automotive Hydraulic Brake Tube 90-10 Copper-Nickel Tubing For many years the tubing in automotive brake systems Hydraulic Brake Tube has been manufactured from low-carbon steel. One or more superficial coatings are applied after brazing to protect the steel substrate from corrosion, because steel has no inherent corrosion resistance to the road environment. Although coating composition [...]

By |November 4th, 2019|BRASS & COPPER, Copper, Copper Alloy Tubes, Copper Nickel, Copper Nickel Tube, Copper Parts, Copper Tubes, Copper Tubing, DoWeDo News, Grade, Metal, Metal Knowledge, Tubing, TUBING|Comments Off on Automotive Hydraulic Brake Tube 90-10 Copper-Nickel Tubing
  • Copper-Nickel Automotive Vehicle Brake Tubing

Copper-Nickel Automotive Vehicle Brake Tubing

Copper-Nickel Automotive Vehicle Brake Tubing A vehicle's braking system is as crucial to a vehicle's performance as its engine and drive train. The tubing carrying pressurized air or fluid through the system is the vital link between master cylinder and slave cylinders at the wheels. Brake system tubing is vulnerable to the pressures of air [...]

By |November 2nd, 2019|BRASS & COPPER, Copper, Copper Coils, Copper Nickel, Copper Pipe, Copper Tubes, Grade, Metal, Metal Knowledge, TUBING|Comments Off on Copper-Nickel Automotive Vehicle Brake Tubing
  • C17510 Copper

C17510 Copper

C17510 Copper C17510 Copper - ASTM B441 (ROD), ASTM B534 (PLATE) , RWMA Class III Primarily utilized in applications that require high thermal or electric conductivity. The alloy offers good strength and hardness characteristics coupled with conductivity in the range of 45-60 percent of copper with ultimate tensile and hardness properties approaching 140 ksi and [...]

  • Single Hole Electrode EDM Brass Tube Brass Pipe For Drilling Machine

Single Hole Electrode EDM Brass Tube / Brass Pipe For Drilling Machine

Single Hole Electrode EDM Brass Tube / Brass Pipe For Drilling Machine Single Hole Electrode EDM Brass Tube / Brass Pipe For Drilling Machine Type: Straight Copper Pipe Application: Water Tube, All kinds edm drilling machines Specification: 0.3-3.0mm Grade: brass/copper Length: 200/300/400/600, 400mm Single Hole Electrode EDM Brass Tube Brass Pipe For Drilling Machine [...]

By |September 20th, 2019|BRASS & COPPER, Brass Accessories, Brass Pipes, Brass Shapes, Brass Tubes, Brass Tubing, Copper, Copper Nickel, PIPE, TUBING, Wire|Comments Off on Single Hole Electrode EDM Brass Tube / Brass Pipe For Drilling Machine
  • Copper Nickel tubes C70600

Copper Nickel tubes, 10% – C70600

Copper Nickel tubes, 10% – C70600 Copper Nickel tubes, 10% – C70600 - exhibits excellent resistance to impingement attack. It is also highly resistant to SCC. This alloy is suitable for Marine condenser tube installations in place of Aluminum Brass, especially where higher water velocities are encountered. Copper Nickel tubes C70600 UNS No. C70600 [...]

By |October 16th, 2018|BRASS & COPPER, Copper, Copper Nickel, Copper Nickel Tube, Copper Pipe, Copper Tubing, PIPE, TUBING|Comments Off on Copper Nickel tubes, 10% – C70600
  • Copper Nickel tubes 30% C71500

Copper Nickel tubes, 30% – C71500

Copper Nickel tubes, 30% – C71500 - has, in general, the best resistance of any of the copper alloys to impingement attack and to corrosion from most acids and waters. It is being used in severe corrosive conditions in which service lives longer than those of other copper alloys are desired. UNS No. C71500 – BSI [...]

By |October 14th, 2018|BRASS & COPPER, Copper, Copper Nickel, Copper Nickel Tube, Copper Pipe, PIPE, Tubing, TUBING|Comments Off on Copper Nickel tubes, 30% – C71500